Radyne OM20 Specifications download pdf (Page 181)

DMD1050 Satellite Modem Board Software Upgrade Procedure

a. From the main menu, the Features menu.

b. “Feature Id: is the unit ID number

The value displayed on the top line of this menu is the 12-digit Unit ID. It is displayed as 3

sets of 4 digits in a dot-delineated format as follows:

1 2 3 4 . 1 2 3 4 . 1 2 3 4

Your Sales Representative will ask you for this number along with the features you wish to

demo.

3. Once your order has been processed, you will be issued a 12-digit demonstration code. This

code can only be used one time and it is only good on the modem for which it was originally

requested. To enter this code, do the following:

a. From the “Enter Selection Number” line type in 45.

b. Press Enter.

c. Enter the new code and press “Enter”

d. Your system is now upgraded.

If the code entered is correct, the display will display CODE ACCEPTED, otherwise the

display will read INVALID CODE

Care should be taken to insure that the demonstration code is entered properly. After

three unsuccessful attempts to enter a code, the upgrade and demonstration capability

will be locked out and it will be necessary to cycle power on the modem in order to

IMPORTANT

continue.

H.6 Canceling Demonstration Mode

At any time, a demonstration may be canceled and have the modem return to its normal

operation. Once the demonstration has been canceled, it cannot be restarted using the old

demonstration code. In order to restart a demonstration, it will be necessary to obtain a new

demonstration code.

To cancel a demonstration from the Terminal Port, perform the following:

1. From the Terminal Main Menu, type in 19 (Features) and press “Enter”.

2. From the “Enter Selection Number” line type in 45.

3. Press <ENTER>.

4. Using the numeric keypad, enter 0000 0000 0000

5. Press < ENTER>.

The modem will immediately terminate the demonstration and the feature set will revert back to

the permanent configuration.

The Mod and Demod Test LED's will stop flashing.

MN-DMD1050 H–3

Revision 9

1 2 ... 176 177 178 179 180 181 182 183

No comments

Radyne OM20 Specifications Page 181