Radyne OM20 Specifications Page 120

  • Download
  • Add to my manuals
  • Print
  • Page
    / 183
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 119
DMD1050 Satellite Modem Board Web Browser
Interface / RX Setup Menu
Figure 7-17. Interface / RX Setup Menu
Circuit ID: Provides entry of Rx Circuit Identifier. Circuits can be given up
to an 11 Character alphanumeric Identity such as DLINK1
Terrestrial Streaming: {BYTE OUTPUT, PACKET OUTPUT} ASI only
Byte output = continuous
Packet output = burst
Terrestrial Interface: {ETHERNET, MIL-188-114A}
Allows the user to select the Receive Type.
BUFFER CLOCK CONTROL
Buffer Size (msec): {0 - 64 msecs}
Allows the user to set the Doppler Buffer Size in msec.
Buffer Clock Polarity: {NORMAL, INVERTED}
Allows the user to select the Buffer Clock Polarity for the Tx
Terrestrial Clock relative to the Tx Data. If G.703 Interface is
selected, this selection cannot be changed.
Number of Buffer Sources: {1 – 5}
Allows the user to select up to 5 clock sources.
Active Buffer Clock: {RXSAT, EXTBNC, SCTE, SCT, EXT IDI}
Shows the current active buffer clock source.
MN-DMD1050 7–30
Revision 9
Page view 119
1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 182 183

Comments to this Manuals

No comments