Radyne OM20 Specifications download pdf (Page 57)

DMD1050 Satellite Modem Board Theory of Operation

3.18 DMD1050 ID Codes (Feature Upgrades)

The modem has unique ID codes that allow the user to add feature upgrades to the modem

without the unit having to be returned to the factory. Users are required to identify these ID codes

when they want additional features added to their unit. Comtech will supply a new ID code that is

required to be entered in the ID code field. Once the new ID code is entered, the modem will

activate the new features.

ID Codes can be located in the Section 7, “Web Browser”, Figure 7-28 - System Setup Menu.

3.19 Strap Codes

The Strap Code is a quick set key that sets many of the modem parameters. For quick setup of

the DMD1050, Strap Codes are very helpful. When a Strap Code is entered, the modem is

automatically configured for the code’s corresponding data rate, overhead, code rate, framing,

scrambler type and modulation. An example of how to set a strap code follows:

Example: In the Ethernet interface <Modulator> Menu, depress the Transmit Gel-tab, then move

the cursor down and depress “General”. Now move the cursor over to ‘Strap Code’. Click inside

the box and enter the new strap code submenu and enter #16. The DMD1050 will be

automatically configured to the parameters shown below in the highlighted row ‘Strap Code 16’.

Refer to Appendix G

for the various strap code options.

MN-DMD1050 3–35

Revision 9

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 182 183

No comments

Radyne OM20 Specifications Page 57