Radyne OM20 Specifications download pdf (Page 70)

DMD1050 Satellite Modem Board Maintenance and Troubleshooting

5.2.1 Alarm Faults

5.2.1.1 Major Tx Alarms

Alarm Possible Cause

FPGA CFG Shows a transmit FPGA hardware failure.

DSP CFG Shows a transmit FPGA failure.

SCT Clock PLL Shows that the Tx SCT Clock PLL is not locked. This alarm flashes during certain

parameter changes. A steady display shows a problem in the modem configuration.

SYM Clock PLL Shows that the Tx Symbol Clock PLL is not locked. This alarm flashes during certain

parameter changes. A steady display shows a problem with the incoming clock to the

modem (SCTE).

LB Synth PLL Shows that the Tx L-Band Synthesizer is not locked. This alarm flashes during certain

parameter changes. A steady display shows a configuration problem in the modem.

Ethernet WAN Shows that the WAN Port is down.

5.2.1.2 Major Rx Alarms

Alarm Possible Cause

FPGA CFG Shows a receive FPGA hardware failure.

DSP CFG Shows a receive DSP failure.

SIGNAL LOCK Shows that the demod is unable to lock to a signal.

FRAME LOCK Shows that the Framing Unit is unable to find the expected framing pattern.

MULTIFRAME LOCK Shows that the Framing Unit is unable to find the expected framing pattern.

LB SYNTH PLL Shows that the Rx L-Band Synthesizer is not locked. This alarm flashes during certain

parameter changes. A steady display shows a problem in the modem configuration.

Ethernet WAN Shows that the WAN Port is down.

5.2.1.3 Minor Tx Alarms

Alarm Possible Cause

TERR CLK ACT Shows no Terrestrial Clock activity.

TERR DATA ACT Shows no Tx Data activity.

TX TERR AIS Shows that AIS has been detected in the Tx Data Stream.

TX DVB FRAME LOCK Shows that the Tx Input Data Stream Framing does not match the selected Tx Terr

Framing. Incorrect Tx Terr Framing is selected. Incorrectly framed Tx Input Data

Stream exists.

MN-DMD1050 5–2

Revision 9

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 182 183

No comments

Radyne OM20 Specifications Page 70