Radyne OM20 Specifications download pdf (Page 179)

Appendix H. Software Upgrade

Procedure

H.1 Software Upgrade Procedure

The outdoor modem software may be upgraded via the terminal or the web interface.

H.2 Terminal Software Upgrade

The DMD1050 Outdoor Modem offers the ability to perform field upgrades of the modem’s

feature set quickly and easily from the Terminal Port. Purchased upgrades will become part of

the modems permanent configuration. Demonstration upgrades will enable the optional features

for a 30-day evaluation period.

H.3 Required Equipment

The DMD1050 Universal Satellite Modem is the only equipment required for this procedure.

H.4 Upgrade Procedure

The following paragraphs describe the procedure for permanently updating the feature set of the

DMD1050 Universal Satellite Modem

1. The following steps allow users to quickly determine from the GUI Interface whether or not the

desired feature(s) are supported by the hardware currently installed in the modem.

Using the GUI interface navigate to the Features menu under “System” gel-tab. Click on

“features”. This will show the available features and all features checked are the

purchased/installed features.

2. Contact Customer Service with the Unit ID and Desired Upgrades. The modem’s Unit ID can be

found in the Terminal interface as follows:

a. From the main menu, the Features menu.

b. “Feature Id: is the unit ID number

MN-DMD1050 H–1

Revision 9

1 2 ... 174 175 176 177 178 179 180 181 182 183

No comments

Radyne OM20 Specifications Page 179