User Manual
Chapter 6. IRD Management
Page 6-22 P/N 2349-72712-01
Table 6-10: IRD System Configuration Parameters
PARAMETER VALUES
PRODUCT VERSION
Board Type Displays the board type.
Board Revision Displays the board revision.
Sw Bios Revision Displays the software bios revision.
Sw Revision Displays the software revision.
6.10. IRD Alarms Configuration
There are three types of IRD alarms available for monitoring when an IRD is remotely
controlled from the System Manager. Figure 6-14 lists the IRD alarms available for monitoring
when an IRD is remotely controlled from the System Manager.
The Alarms dialog box shows the status of the IRD alarms. A Red alarm indicator next to the
alarm name warns that a fault has occurred; a green indicator shows proper working order.
The alarm dialog box is the only box that keeps updating its data from the IRD without
pressing the “refresh” button. However, an automatic update occur only every 15 seconds. To
update the data immediately, press the “refresh” button.
Figure 6-14 shows the IRD Alarm dialog box. Table 6-11 describes the IRD alarms.
Figure 6-14: IRD Alarms Dialog Box
Table 6-11: IRD Alarm Dialog
PARAMETER VALUES
Unit hardware Unit Hardware error
Bit stream Bit Stream error
Product decoding Product decoding error
Comments to this Manuals