User Manual
Chapter 4. Encoder Management
Page 4-10 P/N 2349-72712-01
4.6. Alarms Dialog Box
There are several types of encoder alarms available for monitoring when an encoder is
remotely controlled from the System Manager. Figure 4-7 lists the encoder alarms available
for monitoring when an encoder is remotely controlled from the System Manager.
The Alarms dialog box shows the status of the Encoder alarms. A Red alarm indicator next to
the alarm name warns that a fault has occurred; a green indicator shows proper working
order.
The alarm dialog box is the only box that keeps updating its data from the encoder without
pressing the “refresh” button. However, an automatic update occur only every 15 seconds. To
update the data immediately, press the “refresh” button.
Figure 4-7 shows the Encoder Alarm dialog box. Table 4-5 describes the Encoder alarms.
Figure 4-7: Encoder Alarms Dialog Box
Comments to this Manuals