User Manual
Chapter 2. Installation
Page 2-12 P/N 2349-72712-01
2.3.4. Multiplexer Configuration
This paragraph explains the multiplexer configuration and is divided to two sections:
• Paragraph 2.3.2.1 explains the multiplexer device configuration.
• Paragraph 2.3.2.2 explains the multiplexer proxy configuration.
2.3.4.1. Multiplexer Device Configuration
Follow the instruction below to configure each Multiplexer device:
1. Right click with the mouse on a Multiplexer device in the system display area. The
Multiplexer context menu is opened. Figure 2-9 shows the Multiplexer context menu.
Figure 2-9: Multiplexer Context Menu
2. Select the ‘Configure Device’ option from the Multiplexer context menu.
3. The RTM-3800 dialog, displayed in Figure 2-10 and Figure 2-11, is opened.
Table 2-6 and Table 2-7 explains the parameters on the RTM-3800 dialog box.
Figure 2-10: RTM-3800 Dialog – Multiplexer Configuration Tab
Table 2-6: RTM-3800 Dialog Parameters – Multiplexer
Configuration Tab
PARAMETER DESCRIPTION
TCP/IP Address Changes the IP address of the Multiplexer
TCP Port The TCP port value of the RTM-3800 can be found
in the file mcmux.cfg on the RTM-3800.
Spare Port No need to configure this parameter
Number of inputs Selects the total physical inputs of the RTM-3800
Comments to this Manuals