NMS-4000
Network Management System
P/N 2349-72712-01 Page 6-19
6.7. IRD Data Configuration
The IRD-2600 and IRD-2800 can be implemented as a solution for remote locations requiring
data links, where no proper line communications exist. In this role, the IRD-2600 and
IRD-2800 decode data from a DVB signal broadcast via satellite or other Telco interfaces.
One of the advanced features of the IRD-2600 and IRD-2800 is simultaneous high-speed and
low-speed data transfer. Data transfer from the encoder is one directional. The IRD-2600 and
IRD-2800 have no feedback, response, or acknowledgement capabilities.
The IRD data dialog box manages the IRD data parameters. Figure 6-11 shows the IRD data
dialog box. Table 6-8 describes the IRD Audio dialog box parameters.
Figure 6-11: IRD Data Configuration Dialog Box
Table 6-8: IRD Data 1 Dialog
PARAMETER VALUES
IRD DATA 1 PARAMETERS
HSB Output Format Selects the HSB Output Format.
Available options: RS-422 (LSB to MSB),RS-422 (MSB to
LSB)
HSD Output Rate Changes the HSD Output Rate.
HSD PID Filtering Selects the HSD PID Filtering.
Available options: Entire Transport Packet, Transport
Payload, P.E.D. Payload.
IRD DATA 2 PARAMETERS
HSB Output Format Selects the HSB Output Format.
Available options: RS-232, RS-422 (LSB to MSB), RS-
422 (MSB to LSB)
HSD Output Rate Changes the HSD Output Rate.
HSD PID Filtering Selects the HSD PID Filtering.
Available options: Entire Transport Packet, Transport
Payload, P.E.D. Payload, DVB Streaming.
Comments to this Manuals