Radyne OM20 Specifications download pdf (Page 199)

MN-OM20– Revision 5 F–1

Appendix F. Efficient

Drop & Insert (D&I)

F.1 Introduction

The following paragraphs describe the menu structure and procedure for configuring a Radyne

OM20 modem for Efficient Drop & Insert Mode.

F.2 Prerequisite

In order for a modem to be configured for efficient Drop & Insert, the modem must have a G.703

Interface card installed and Open Network Drop & Insert must be enabled. If you modem does

not have the required hardware and/or feature set enabled, you will need to contact your Radyne

salesperson to order the appropriate hardware and/or feature set upgrade. If your modem has the

appropriate hardware, but the software revision is prior to AY, you will need to download the

latest modem firmware from the Radyne FTP website.

The following menus illustrate how to determine whether or not your modem has the required

hardware and feature set options.

SYSTEM

HW/FW CONFIG

FIRMWARE

F05058-AY 6.1 or later required

SYSTEM

HW/FW CONFIG

TERR INTFC BRD

01-AS/4975 or equivalent required

SYSTEM

HW/FW CONFIG

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 219 220

No comments

Radyne OM20 Specifications Page 199