Radyne OM20 Specifications download pdf (Page 178)

OM20 Universal Outdoor Modem Appendix D

MN-OM20– Revision 5 D–4

11. To navigate other parts of the site, the modem needs to know who the user is. Upon selecting any

of the commands, the modem will request an authentication from the user. This authentication is

done through the use of a username and secret password. The OM-20 is initially configured with

the following defaults as illustrated in Figure 4.

User Name: admin

Password: admin

Figure 4. Password Setup Screen

IM PO RTA NT

The modem offers addition features that allow for specific administrative

privileges for various users. Please refer to section 3.3 for additional

information.

This concludes the initial set up that will allow the user full access to the modem. In the event

that the user needs to change the IP Addressing to support a different network then proceed to

section 3.1.

D.4 IP Network Change from the Initial Web Setup

D.4.1 Configuring the modem

This section is a continuation from the initial setup or can be used on an existing system that requires a

network setup change. The modem needs to be configured with the correct network settings. Please

consult with your IT manager for an IP address mask, and modem, server, and router IP addresses valid

for your network. To recognize a subnet, each system in the subnet must have the same subnet mask.

This field should be set before changes are made to the Modem or Router Address. Refer to Figure 5.

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 219 220

No comments

Radyne OM20 Specifications Page 178