Radyne OM20 Specifications download pdf (Page 115)

OM20 Universal Outdoor Modem Web Browser/Remote Protocol

MN-OM20– Revision 5 6–41

BUFFER CLOCK CONTROL

Buffer Size (msec): {0 - 64 msecs}

Allows the user to set the Doppler Buffer Size in msec.

Buffer Clock Polarity: {NORMAL, INVERTED}

Allows the user to select the Buffer Clock Polarity for the Tx

Terrestrial Clock relative to the Tx Data. If G.703 Interface is

selected, this selection cannot be changed.

Number of Buffer Sources: {1 – 5}

Allows the user to select up to 5 clock sources.

Active Buffer Clock: {RXSAT, EXTBNC, SCTE, SCT, EXT IDI}

Shows the current active buffer clock source.

BUFFER CLOCK SOURCES

Source 1 of 1: {SCTE, SCE, RX SAT, EXT BNC, EXT IDI}

Source 2: {SCTE, SCE, RX SAT, EXT BNC, EXT IDI}

Source 3: {SCTE, SCE, RX SAT, EXT BNC, EXT IDI}

Source 4: {SCTE, SCE, RX SAT, EXT BNC, EXT IDI}

Source 5: {SCTE, SCE, RX SAT, EXT BNC, EXT IDI}

RX ASYNC

Async Mode: {ES-ES, ESC ENHANCED}

ES-ES is displayed when IBS Network Spec is selected. ESC

Enhanced can be selected in Closed Net and uses the Overhead

Signaling bytes in the IBS Overhead to pass asynchronous data.

This menu is not available when SCC is selected.

ES Interface: {RS-232, RS-485}

Allows the user to select the interface type.

ES Baud Rate: {150 – 1024} For IBS ES to ES

{150 – 19200} For ES to ES Enhanced

{150 – 115200} For SCC Communications

ES to ES : Fixed Baud Rate based on IBS Network

Specification. Available rates are listed in Table 3-3.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 219 220

No comments

Radyne OM20 Specifications Page 115