Radyne DM240XR Specifications download pdf (Page 161)

MN-DM240XR– Revision 13 A–1

Appendix A. Front Panel Upgrade

Procedure

A.1 Introduction

The DM240XR Satellite Modulator offers the ability to perform field upgrades of the unit's feature

set quickly and easily from the front panel. Purchased upgrades will become part of the modems

permanent configuration. Demonstration upgrades will enable the optional features for a 30-day

evaluation period. Front panel upgrades are supported by Firmware Version FO5377-L or

greater.

A.2 Required Equipment

The DM240XR is the only equipment required for this procedure.

A.3 Upgrade Procedure

The following paragraphs describe the procedure for permanently updating the feature set of the

Modulator.

1. The following steps allow users to quickly determine from the front panel whether or not

the desired feature(s) are supported by the hardware currently installed in the modem.

a. From the modem’s Main Menu, scroll right to the SYSTEM Menu.

b. Scroll down.

c. Scroll right to the HW/FW CONFIG Menu.

d. Scroll down

e. Scroll right to the FEATURES Menu.

f. Scroll down.

g. Scroll right to the UPGRADE LIST Menu.

h. Scroll down.

i. Scroll right through the available list of options.

The top line identifies the options and the second line identifies the following options

status:

INSTALLED indicates that the option is already available as part of the modulator's feature set.

HW & KEY REQ indicates that additional hardware is required to support the option. Contact

your Radyne sales representative for more information regarding the required hardware upgrade.

KEY CODE REQ indicates that the desired option is available as a front panel upgrade.

2. Contact Radyne with the Unit ID and Desired Upgrades. The modulator’s Unit ID can be

found on the front panel as follows:

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 195 196

No comments

Radyne DM240XR Specifications Page 161