MN-DM240XR Revision 13 IMPORTANT NOTE: The information contained in this document supersedes all previously published information rega
Table of Contents Revision 13 DM240XR High-Speed Digital Modulator MN-DM240XR viii Blank Page
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–6 qam16(3), apsk16(9), apsk32(10) }
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–7 STATUS optional DESCRIPTION "unsupported&quo
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–8 dual(2), offset(3), posfir(4),
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–9 ACCESS read-write STATUS current DESCRIPTION
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–10 If the Multi-PIIC mode is redundancy, radPrimePiicSlot
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–11 normal(0), bypassed(1) } ACCESS read
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–12 STATUS current DESCRIPTION "Selects the dir
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–13 DESCRIPTION "Selects the backup delay in 100ms steps
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–14 radServerIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS re
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–15 Bit 7 = Invalid Terrestrial Interface "
i PREFACE About this Manual This manual describes the installation and operation for the Radyne DM240XR. This is an informational document intende
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–16 STATUS current DESCRIPTION "Common Alarm la
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–17 Bit 13 = OC3 Interface Present Bit 14..15 = Spares
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–18 -- radPiicSlotClockActivity OBJECT-TYPE -- SYNTAX INTEGER { --
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–19 radTerrEthActPrime OBJECT-TYPE SYNTAX INTEGER { di
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–20 DESCRIPTION "Shows the backup data activity of the G
MN-DM240XR– Revision 13 9–1 Chapter 9. Remote Operations When new features are added to Radyne Corp. equipment, the control parameters are appende
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–2 Command Opcode Query Mod All 2400h Query Mod Latched Alarms 240
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–3 Terrestrial Interface Type Terrestrial Framing Carrier Set Roll O
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–4 <1> Frequency Reference Source 0 = Internal, 1 = External &
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–5 Source <1> Reserved TBD, Default = 0 <11> Reserved TB
DM240XR Revision 13 Preface MN-DM240XR ii Safety Compliance EN 60950 Applicable testing is routinely performed as a condition of manufacturing on al
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–6 <1> BB Scrambler Bypass 0 = Normal, 1 = Bypass <1> Ou
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–7 <1> Reserved <1> Major Alarm Bit 0 = Spare Bit 1 = T
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–8 Bit 3 = Spare Bit 4 = Spare Bit 5 = Spare Bit 6 = Spare Bit 7 = S
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–9 Opcode: <2405h> Query a Modulator’s Latched Alarms Query
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–10 0 = Pass, 1 = Fail <1> Common Fault Bit 0 = -12 V Alarm Bi
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–11 <1> Latched Major Alarm Bit 0 = Spare Bit 1 = Transmit Ove
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–12 <1> Slot 1 PIIC Type 0x13 = ASI <1> Slot 2 PIIC Type
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–13 <1> Minute 0 – 59 <1> Second 0 – 59 Opcode: <241
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–14 Opcode: <245Ch> Query Multi-PIIC Configuration <1>
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–15 <2> Jitter Size 1 - 20 ( x 10ms steps ) <1> Jitter T
DM240XR Revision 13 Preface MN-DM240XR iii Warranty Policy Comtech EF Data products are warranted against defects in material and workmanship for a
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–16 Opcode: <2B54h> Command Pilot Symbols <1> Pilot Sy
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–17 <1> Spectrum 0 = Inverted, 1 = Normal <1> Reserved T
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–18 Bit 6 = Terr Ethernet jitter buffer underflow Bit 7 = Terr Ether
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–19 <1> Redundancy Mode 0 = Force Prime, 1 = Force Backup, 2
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–20 When changing Data Rate, Symbol Rate, Inner FEC Rate, Modulati
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–21 Opcode: <2602h> Command a Modulator's Frequency <
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–22 Opcode: <2616h> Command a Modulator's External Refer
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–23 <1> Output Clock Source 0 = SCTE, 1 = SCT, 2 = None Opcod
DM240XR High-Speed Digital Modulator Remote Operations MN-DM240XR– Revision 13 9–24 Opcode: <2C05h> Command Set Date <1> Year 00 – 99
MN-DM240XR– Revision 13 10–1 Chapter 10. Web Browser 10.1 Web Browser User Interface The Web Browser user interface is available on the DM240XR. The
DM240XR Revision 13 Preface MN-DM240XR iv Customer Support Support Business Hours – Monday Through Friday – 8:00 a.m. to 5:00 p.m. (MST): Comtech E
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–2 10.2 Configuring Your PC An example of the GUI layout is shown in Fi
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–3 Table 10-1. Item Number Description Function 1 Product Name This de
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–4 Modulator LED Indicators Transmit On Green Indicates that the Modula
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–5 10.3.1 Introduction Menu This menu will first appear when starting up
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–6 10.3.1.1 Login Screen Upon initially accessing either the Setup, Moni
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–7 10.3.2 Password Setup The Password Access Menu allows for multiple ope
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–8 Preferences Menu Figure 10-5. Preferences menu User Confirmati
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–9 10.3.3 IP and Application Administration The IP and Application menu
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–10 SNMP SNMP VERSION: V1 & V2 TRAP VERSION: V1 AUTHORIZ
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–11 TERMINAL AND REMOTE PORT Type VT100 baud rate 19200 interface rs232
MN-DM240XR– Revision 13 1–1 Chapter 1. INTRODUCTION This chapter provides an overview of the DM240XR High-Speed Digital Modulator. The DM240XR will
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–12 The IP Address of the Local Network Router. If a router is present
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–13 Figure 10-8. Configuring The PC
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–14 10.3.4 Monitor and Control Menu Under this menu, all modem functions
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–15 Figure 10-10. Equalizer Menu
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–16 10.3.4.2 Interface Menu The Interface menu contains sub menus; Terr
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–17 10.3.4.3 RFSWITCH Menu Figure 10-13. RFSWITCH Menu 10.3.4.4 Mo
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–18 Figure 10-15. Event Buffer Menu Delete All: Cleans the entire
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–19 Figure 10-16. Terr Ethernet Menu 10.3.4.5 Alarms Menu Figure 10-
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–20 10.3.4.6 System Menu The System menu contains sub menus; Terminal &a
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–21 Figure 10-20. Features Menu W/Key Code Figure 10-21. Back Chan
DM240XR High-Speed Digital Modulator Introduction MN-DM240XR– Revision 13 1–2 eliminating the need for external Group Delay/Amplitude Equalizers. A
DM240XR High-Speed Digital Modulator Web Browser MN-DM240XR– Revision 13 10–22 10.3.4.7 Test Menu Figure 10-22. Pattern/Carrier Menu
MN-DM240XR– Revision 13 A–1 Appendix A. Front Panel Upgrade Procedure A.1 Introduction The DM240XR Satellite Modulator offers the ability to perfor
DM240XR High-Speed Digital Modulator Front Panel Upgrade Procedure MN-DM240XR– Revision 13 A–2 a. From the modulator's Main Menu, scroll righ
DM240XR High-Speed Digital Modulator Front Panel Upgrade Procedure MN-DM240XR– Revision 13 A–3 A.4 Demonstration Procedure The procedure for enabli
DM240XR High-Speed Digital Modulator Front Panel Upgrade Procedure MN-DM240XR– Revision 13 A–4 2. Contact Radyne with the Unit ID and Request a Dem
DM240XR High-Speed Digital Modulator Front Panel Upgrade Procedure MN-DM240XR– Revision 13 A–5 A.4.1 Running in Demonstration Mode Because of the po
DM240XR High-Speed Digital Modulator Front Panel Upgrade Procedure MN-DM240XR– Revision 13 A–6 A.4.2 Canceling Demonstration Mode At any time, a de
MN-DM240XR– Revision 13 B–1 Appendix B. TCP/IP Ethernet Setup B.1 Introduction The DM240XR supports SNMP, FTP protocols and the Web Browser. Utiliz
DM240XR High-Speed Digital Modulator TCP/IP Ethernet Setup MN-DM240XR– Revision 13 B–2 c. NON-VOL : This will allow for setting up all required IP
DM240XR High-Speed Digital Modulator TCP/IP Ethernet Setup MN-DM240XR– Revision 13 B–3 set to a foreign address. Broadcast and loop back addresses
MN-DM240XR– Revision 13 2–1 Chapter 2. Installation This section provides unpacking and installation instructions, and a description of external con
DM240XR High-Speed Digital Modulator TCP/IP Ethernet Setup MN-DM240XR– Revision 13 B–4 RJ45 Connector A RJ45 Connector B Pin #1 Pin #3 Pin #2 Pin #6
DM240XR High-Speed Digital Modulator TCP/IP Ethernet Setup MN-DM240XR– Revision 13 B–5 Local Area Connection Properties Box 4. Select “Use the f
DM240XR High-Speed Digital Modulator TCP/IP Ethernet Setup MN-DM240XR– Revision 13 B–6 To verify that connectivity and settings are correct, use the
DM240XR High-Speed Digital Modulator TCP/IP Ethernet Setup MN-DM240XR– Revision 13 B–7 b. The Link Light is illuminated. c. The IP Address that is
DM240XR High-Speed Digital Modulator TCP/IP Ethernet Setup MN-DM240XR– Revision 13 B–8 Notes:
MN-DM240XR– Revision 13 C–1 Appendix C. Web Browser Quick Setup Guide C.1 Introduction The DM240XR Web Browser allows for connection to Radyne prod
DM240XR High-Speed Digital Modulator Web Browser Quick Setup Guide MN-DM240XR– Revision 13 C–2 Radyne utilizes authentication and authorization toge
DM240XR High-Speed Digital Modulator Web Browser Quick Setup Guide MN-DM240XR– Revision 13 C–3 and data rates cannot be overridden. The Confirmation
DM240XR High-Speed Digital Modulator Web Browser Quick Setup Guide MN-DM240XR– Revision 13 C–4 C.2.3 Change Access Rights 1. Go to <USERx> S
DM240XR High-Speed Digital Modulator Web Browser Quick Setup Guide MN-DM240XR– Revision 13 C–5 To navigate to other parts of the site, the modem nee
DM240XR High-Speed Digital Modulator Installation MN-DM240XR– Revision 13 2–2 CAUTION Before initially applying power to the unit, it is a good idea
DM240XR High-Speed Digital Modulator Web Browser Quick Setup Guide MN-DM240XR– Revision 13 C–6 DM240XR Monitor and Control Web Page The top of
MN-DM240XR– Revision 13 D–1 Appendix D. AutoEQ™ Interface Operation Guide D.1 Introduction Appendix C outlines the operation and configuration of th
DM240XR High-Speed Digital Modulator AutoEQ™ Interface Operation Guide MN-DM240XR– Revision 13 D–2 D.3 AutoEQ™ PIIC Interface Theory of Operation A
DM240XR High-Speed Digital Modulator AutoEQ™ Interface Operation Guide MN-DM240XR– Revision 13 D–3 AutoEQ™ supports SCPC equalization of Group Delay
DM240XR High-Speed Digital Modulator AutoEQ™ Interface Operation Guide MN-DM240XR– Revision 13 D–4 D.4 AutoEQ™ Menu Options and Parameters These Me
DM240XR High-Speed Digital Modulator AutoEQ™ Interface Operation Guide MN-DM240XR– Revision 13 D–5 EQ ENABLE: {Enable, Disable} Allows the DM240XR
DM240XR High-Speed Digital Modulator AutoEQ™ Interface Operation Guide MN-DM240XR– Revision 13 D–6 (EQ CAL: Cont) REF ACQ: Although default referen
DM240XR High-Speed Digital Modulator AutoEQ™ Interface Operation Guide MN-DM240XR– Revision 13 D–7 D.5 AutoEQ™ Back Channel Menu Options and Parame
DM240XR High-Speed Digital Modulator AutoEQ™ Interface Operation Guide MN-DM240XR– Revision 13 D–8 D.6 AutoEQ Backchannel Setup Introduction To sup
DM240XR High-Speed Digital Modulator AutoEQ™ Interface Operation Guide MN-DM240XR– Revision 13 D–9 Figure 5. AutoEQ™ Backchannel Setup Back Channe
DM240XR High-Speed Digital Modulator Installation MN-DM240XR– Revision 13 2–3 Shielded cables with the shield terminated to the conductive backshel
DM240XR High-Speed Digital Modulator AutoEQ™ Interface Operation Guide MN-DM240XR– Revision 13 D–10 D.7 AutoEQ™ Operation Procedure The following s
DM240XR High-Speed Digital Modulator AutoEQ™ Interface Operation Guide MN-DM240XR– Revision 13 D–11 Figure 6. AutoEQ™ Ref Acq Set-up For best r
DM240XR High-Speed Digital Modulator AutoEQ™ Interface Operation Guide MN-DM240XR– Revision 13 D–12 order to assure proper acquisition of the downli
DM240XR High-Speed Digital Modulator AutoEQ™ Interface Operation Guide MN-DM240XR– Revision 13 D–13 To disable a programmed Equalizer Setting, use t
DM240XR High-Speed Digital Modulator AutoEQ™ Interface Operation Guide MN-DM240XR– Revision 13 D–14 D.12 Additional Features D.12.1 AutoEQ™ Statu
METRIC CONVERSIONS Units of Length Unit Millimeter Centimeter Inch Foot Yard Meter Kilometer Mile 1 millimeter 1 0.1 0.0394 0.0033 0.0
2114 WEST 7TH STREET TEMPE ARIZONA 85281 USA 480 • 333 • 2200 PHONE 480 • 333 • 2161 FAX
DM240XR High-Speed Digital Modulator Installation MN-DM240XR– Revision 13 2–4 Notes:
MN-DM240XR– Revision 13 3–1 Chapter 3. Theory of Operation 3.1 Theory of Operation The advanced hardware/software architecture of the DM240XR allow
DM240XR High-Speed Digital Modulator Theory of Operation MN-DM240XR– Revision 13 3–2 Figure 3-1. Functional Block Diagram 3.3 DVB-S2-BS-NBC Opera
MN-DM240XR– Revision 13 4–1 Chapter 4. User Interfaces 4.1 User Interfaces There are four user interfaces available for the DM240XR family of produ
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–2 Item Number Description Function 1 LCD Front Panel Display Displ
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–3 4.2.4 Parameter Setup The four arrow keys (↑), (↓), (→), (←), to t
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–4 FFigure 4-2. DM240XR Main Programming Menu
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–5 If at any time the user wishes to abort the changes being made, de
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–6 RFSWITCH: {PRIME, BACKUP} {OFFLINE, ONLINE} The RF Switch menu opt
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–7 configure this menu when user desires to display the satellite upli
Copyright © 2012 Comtech EF Data. All rights reserved. Printed in the USA. Comtech EF Data, 2114 West 7th Street, Tempe, Arizona 85281 USA, 480.333.2
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–8 GOLD SEQ N: {0 - 262142} Gold code sequence index. Displayed only
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–9 signal. The calibration output bandwidth is set by the symbol rate
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–10 4.3.3.1 Plug-In Interface Card (PIIC) ACTIVE INPUT: {SLOT 1, SL
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–11 INTERFACE TYPE: {ASI/Advanced ASI, HSSI, M2P Parallel, DVB Parall
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–12 PCR RESTAMPING: {ON, OFF} This selection is available only when
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–13 INTERFACE MENU - The following new items are available under the I
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–14 JITTER TRACKING: {Widest, Wide, Mid Level, Narrow, Narrowest} Allo
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–15 Prime Column FEC packets must arrive on Prime UDP port + 2 Prime
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–16 Backup Row FEC packets must arrive on Prime UDP port + 4 SOURCE
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–17 100 Mbps Full: The unit has established a valid 100 Mbps Full Dup
Blank Page
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–18 These menus are displayed when in COP3 Mode only. BACKUP DATA
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–19 Indicates the number of times the modulator has had to use the FEC
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–20 4.3.4 RF Switch Menu Options and Parameters REDUNDANCY MODE: {M
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–21 SYSREF PLL: {PASS/FAIL, UNMASKED/MASKED} COMPOSITE PLL: {
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–22 TX MINOR (Menu) TERR CLK ACT: {PASS/FAIL} TERR DATA ACT: {PAS
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–23 BAUD RATE: {150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–24 ROUTER IP ADDR {XX.XX.XX.XX} Hexidecimal Address {ddd.ddd.ddd.ddd
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–25 When V3 is used, three contexts are supported: public, mib2, and
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–26 numeric characters. Alpha characters can be entered using the up a
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–27 Admin: At this highest access right, the users can monitor and c
iii Table of Contents CHAPTER 1. INTRODUCTION ... 1–1 1.1 Descriptio
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–28 FTP (menu) PORT: {XXXX} FTP Port number must be set the same val
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–29 RECEIVE TIMEOUT: {X.X MINUTES} This value is factory set, and sho
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–30 INTFC 3 TYPE: {“Status Only”} Displays interface type installed
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–31 Complete information on monitor and control software is contained
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–32 All nodes on a given control bus have a unique address that must
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–33 Table 4-4. Checksum Calculation Example BYTE FIELD DATA CONTENT
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–34 4.4.3 Frame Description and Bus Handshaking In a Monitor and Cont
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–35 RESPONSE OPCODE DESCRIPTION OPCODE Good Message 0000h Bad Parame
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–36 4.4.5 Collision Avoidance When properly implemented, the physical
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–37 DMD15 Modem 22 DVB3030 Video Modulator, DM240 23 Reserved for fu
Table of Contents Revision 13 DM240XR High-Speed Digital Modulator MN-DM240XR iv 4.4 Remote Port User Interface ...
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–38 If packets are handled in this fashion, there will also be backwar
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–39 4.5 Ethernet Port User Interface The Ethernet Port of the DM240XR
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–40 4.7.4 Private {internet 4} 1.3.6.1.4 This is possible the m
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–41 Figure 4-4b. Object Identifiers in the Management Information Ba
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–42 4.8.1 Connecting the Terminal 1. Connect the Terminal to the Ter
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–43 Figure 4-6. Modulator Menu Figure 4-7. Event Log Menu
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–44 Figure 4-8. Multi-PIIC Control Menu Figure 4-9. Test Control
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–45 Figure 4-10. TCP/IP/SNMP Control Menu Figure 4-11. Front Pane
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–46 Figure 4-12. RF Redundancy Switch Menu Figure 4-13. Gig Ether
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–47 Figure 4-14. SYSTEMS CONTROL Menu
Table of Contents Revision 13 DM240XR High-Speed Digital Modulator MN-DM240XR v 5.12 Plug-In Interface Cards (PIICs) ...
DM240XR High-Speed Digital Modulator User Interfaces MN-DM240XR– Revision 13 4–48 Notes:
MN-DM240XR– Revision 13 5–1 Chapter 5. Rear Panel Interfaces This section discusses the electrical interfaces available from the rear panel. All lo
DM240XR High-Speed Digital Modulator Rear Panel Interfaces MN-DM240XR– Revision 13 5–2 Figure 5-1d. DM240XR Rear Panel Connectors (ASI OUT) Fig
DM240XR High-Speed Digital Modulator Rear Panel Interfaces MN-DM240XR– Revision 13 5–3 5.2 AC Power The unit is powered from a 100 – 240 VAC, 50 –
DM240XR High-Speed Digital Modulator Rear Panel Interfaces MN-DM240XR– Revision 13 5–4 5.5 External Reference (Input) The External Reference Input
DM240XR High-Speed Digital Modulator Rear Panel Interfaces MN-DM240XR– Revision 13 5–5 5.8 Alarm Port The Alarm Connector (J3) is used to indicate
DM240XR High-Speed Digital Modulator Rear Panel Interfaces MN-DM240XR– Revision 13 5–6 5.10 RF Redundancy Switch Control (J2) The Each modulator ha
DM240XR High-Speed Digital Modulator Rear Panel Interfaces MN-DM240XR– Revision 13 5–7 5.12 Plug-In Interface Cards (PIICs) The DM-240XR provides t
DM240XR High-Speed Digital Modulator Rear Panel Interfaces MN-DM240XR– Revision 13 5–8 5.12.2 ASI Monitor Incoming data from the active PIIC slot is
DM240XR High-Speed Digital Modulator Rear Panel Interfaces MN-DM240XR– Revision 13 5–9 Table 5-5. M2P RS-422 Parallel - 25-Pin Female Pin No. Signa
Table of Contents Revision 13 DM240XR High-Speed Digital Modulator MN-DM240XR vi 9.2 Modulator Command Set ...
DM240XR High-Speed Digital Modulator Rear Panel Interfaces MN-DM240XR– Revision 13 5–10 Table 5-6. DVB RS-422 Parallel, 25-Pin Female Pin No. Signa
DM240XR High-Speed Digital Modulator Rear Panel Interfaces MN-DM240XR– Revision 13 5–11 Table 5-9. HSSI (High-Speed Serial Interface) 50-Pin Connec
DM240XR High-Speed Digital Modulator Rear Panel Interfaces MN-DM240XR– Revision 13 5–12 Table 5-10. RS530 (RS-422) Connector Pin No. Signal Name
MN-DM240XR– Revision 13 6–1 Chapter 6. Maintenance and Troubleshooting This section discusses unit maintenance and troubleshooting for the DM240XR Hi
DM240XR High-Speed Digital Modulator Maintenance and Troubleshooting MN-DM240XR– Revision 13 6–2 Notes:
MN-DM240XR– Revision 13 7–1 Chapter 7. Technical Specifications 7.1 Introduction This section defines the technical performance parameters and spec
DM240XR High-Speed Digital Modulator Technical Specifications MN-DM240XR– Revision 13 7–2 7.3 Baseband Specification 7.3.1 DVB-S Compliance EN 30
DM240XR High-Speed Digital Modulator Technical Specifications MN-DM240XR– Revision 13 7–3 0.25 0.35 Terrestrial Input Clock Accuracy: 400 ppm
DM240XR High-Speed Digital Modulator Technical Specifications MN-DM240XR– Revision 13 7–4 Consult Factory on ACM & VCM, Multiple Transport Strea
DM240XR High-Speed Digital Modulator Technical Specifications MN-DM240XR– Revision 13 7–5 Size: 19” W x 17” D x 1.75" H (48.3 x 43.2 x 4.45 c
Table of Contents Revision 13 DM240XR High-Speed Digital Modulator MN-DM240XR vii APPENDIX C. WEB BROWSER QUICK SETUP GUIDE ...
DM240XR High-Speed Digital Modulator Technical Specifications MN-DM240XR– Revision 13 7–6 DVB-S Series 200 Modulation FEC MPEG Unframed Minimum
DM240XR High-Speed Digital Modulator Technical Specifications MN-DM240XR– Revision 13 7–7 7.10.1 Data Rates (DVB-S2) All Data Rates in Bps. DVB-S2
DM240XR High-Speed Digital Modulator Technical Specifications MN-DM240XR– Revision 13 7–8 DVB-S2 Series 300 Modulation FEC MPEG Minimum Maximum Q
DM240XR High-Speed Digital Modulator Technical Specifications MN-DM240XR– Revision 13 7–9 16APSK 2/3 2637201 118674033 16APSK 3/4 2966728 133
DM240XR High-Speed Digital Modulator Technical Specifications MN-DM240XR– Revision 13 7–10 Notes:
MN-DM240XR– Revision 13 8–1 Chapter 8. SNMP -- ___________________________________________________________________________ -- $RCSfile: hsmmib.txt
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–2 DESCRIPTION "Voltage level in tenths of a volt."
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–3 ::= { radSNMPModNVStatus 3 } radDataRate OBJECT-TYPE SYNT
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–4 SYNTAX INTEGER { scte(0), sct(1),
DM240XR High-Speed Digital Modulator SNMP MN-DM240XR– Revision 13 8–5 g703E3(4), g703T3(5), sts1(6),
Comments to this Manuals