Radyne OM20 User Manual download pdf (Page 99)

Appendix C: Cookbook

Hardware Setup  Fig. 5.1

1.1.

Basic configuration of the serial interface (BER tester)  Tab. 5.1

1.2.

Basic configuration of the serial terrestrial interface (DMD20)  Tab. 5.2

1.3.

Basic configuration of DVB framing mode (DMD20)  Tab. 5.4

1.4.

Basic configuration of the IP/SNMP management interface (DMD20)  Tab. 5.3

1.5.

Basic configuration of the IP/SNMP management interface (Managing Station) 

IP=10.0.0.3/24

Software Setup of the Managing Station

2.1.

Prerequisite  POSIX compatible environment, SNMP enabled, C++ compiler

2.2.

Copy vendor specific MIB  DMD20-MIB.txt into directory ./mibs

2.3.

Optional: Build Measuring Executable (mt1.exe)  make –f makefile1

2.4.

Build Managing Executable (mt2.exe)  make –f Makefile

Customize Managing Executable

3.1.

Set initial start values  conf.txt

(for the file format see chapter 5.3)

3.2.

Set reference values for the controller  ref.txt

(for the file format see chapter 5.3)

3.3.

Start controller  mt2 -t

1 2 ... 94 95 96 97 98 99 100

No comments

Radyne OM20 User Manual Page 99