Radyne QAM256 Operations Instructions Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 87
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
QAM256 Digital Video Modulator and Upconverter User Interfaces
TM077 – Rev. 4.0 4-7
4.3.6 System Menu Options and Parameters
Control Mode: {Front Panel, Computer}
Date: Displays the current date.
Time: Displays the current time.
Bklt Level: {0 – 99 seconds, 0 = No Timeout}
Key Click: {On, Off}
Emulation: TBD
Firmware Version: M&C Version
Last Rate: {Auto, Symbol, Data}
4.3.7 Test Menu Options and Parameters
LED Test: {Normal}
Carrier: {Normal, CW}
4.4 Terminal Port User Interface
The Remote Port (J5) of the QAM256 allows for complete control and monitoring of all QAM256
parameters and functions via an RS-232 Serial Interface, or RS-485 for RLLP Protocol. ‘Terminal
Mode’ can be entered from the front panel by selecting “System” and then “Control Mode”
followed by “Terminal”. The baud rate and evaluation type can be changed at the front panel by
using the System>Baud Rate Menu.
The Terminal Control Mode is menu-driven and the allowable values for each item number will be
shown. To change an item, type in its number followed by <ENTER>. If the parameter to be
changed requires a numeric value, enter the number followed by <ENTER> If the parameter is
non-numeric, press <SPACE> to cycle through the list of available entries.
Items that do not have ID numbers are Status only and cannot be
changed.
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 86 87

Comments to this Manuals

No comments